This would essentially be like hot-plugging the Eas圜ap, and I have no idea if it would work or not. I want to try to see if it would help to create a sort of delayed relay which interrupts power to the Eas圜ap, so that maybe 5 seconds after the ignition turns on then the Eas圜ap would be powered up. One time I think I got maybe 4 power-off / power-on cycles where the backup camera worked after the 4th cycle, but I usually expect the backup camera only works after a reboot.įYI when I say 'power-off / power-on' I mean where the ignition is turned off (removing power, putting N7 into sleep mode), then some time later the ignition is turned on (which wakes the N7 and re-powers USB peripherals). While Eas圜ap for backup camera 'works' on the 2012, it has one primary limitation: after some number of power-off / power-on cycles the Eas圜ap / CarCam function stops working until a reboot.
Please use a good quality OTG cable and ensure power supply. Please switch the video Standard (PAL/NTSC/SECAM) if video freeze when using Eas圜ap. You'll need to be on USBROM, then flash the modified kernel (have you found that download link already?). Please click USB icon from toolbar to open Device dialog to open device if the system unable to detect your device. Click to expand.Woah, 2 tablets would be.
